Zip HydroTap Miniboil Elite Features

• Super-compact, super-simple instant boiling water system for home kitchens.
• Press the red touch pad and safety lock together for filtered boiling water, instantly.

No more waiting for water to boil for tea, coffee and cooking.

• Press the blue touch pad for filtered ambient water, instantly. Great tasting freshly filtered water for cool drinks and cooking.
• Permanent safety lock requires two finger operation to access boiling water.
• Temperature status indicator light signals when boiling water is ready to use.
• Filter warning light signals when the water filter cartridge replacement is due.

Super compact under sink unit with external filter system

• The Zip HydroTap Miniboil Elite makes it easy to install where sink cupboard space is limited.
• PLUS internal boiling water pump for steady continuous flow.
• Water dispenses at set temperature from the first drop. No waste.
• PLUS cool-touch tap head and body
• Dimensions: 212 x 272 x 338 mm
• Maximum cups at any one time: 18
• Approximately recovery time per minute: 1 Cup. This means that once the unit’s water has been used, the system will recover a cup a minute up to 18 minutes for full capacity.
• Element rating: 2kW @ 240V Single phase.

Superior triple action sub-micron filtration ensures crystal clear, great tasting, healthier water

1. The Zip HydroTap Miniboil Elite will remove impurities smaller than one thousandth of a millimetre, including Crypto sporidium and Giardia. It reduces dirt, rust, asbestos fibres and other suspended impurities.
2. Removes chlorine plus other tastes and odours to leave water crystal clear and odourless
3. Reduces common lime/scale build up inside the tank.

Plumbing

The Zip HydroTap Miniboil Elite must be installed by a qualified plumber in accordance with instructions supplied with the product and with South African plumbing regulations. Water supply must be potable (drinkable), and deliver at least 2 litres per minute at a minimum dynamic pressure of 70kPa. If static pressure exceeds 600kPa, a pressure reducing valve must be fitted. An isolating valve must be installed between the water supply and the under-sink system. The under-sink system must be located directly beneath the tap – max up to 1000mm away. Under-sink tubing must be taut for proper drainage – and never be looped or coiled.

Electrical

Plugged to a 15amp GPO within 1000mm. Power supply – 220V to 240V AC 50/60Hz. nstall in accordance with South African safety regulations.

Ventilation

The under-sink system must be installed with ventilation clearances 50mm left and right, 220mm above and 65mm rear. The cupboard containing the under-sink system must be amply ventilated. Buffers supplied must be fitted to the inside of cupboard doors to prevent flush closure, creating an undetectable 4mm airspace around each door.

Filtration

Sub-micron – standard

Sub-micron filtration is standard and has the added benefit of removing micro-organisms such as Cryptosporidium and Giardia. Not suitable for areas with excessively high levels of sediment in the water supply as this may require the filter to be changed more frequently than practical. In such areas, a five-micron filter may be substituted

Five-micron – optional

The five-micron filter gives great tasting water because it removes general contaminants and sediment, plus chlorine taste and odour, but will not filter out parasites such as Cryptosporidium and Giardia.

Inline Easy Clean Filter (Optional but recommended)

In areas with dirty water it is highly recommended to install an Easy Clean filter. The inline filter has an small transparent cup for visual monitoring.  This enables the user to flush-out dirt with a lever and spout and not interrupt the water supply.  Extremely important in commercial and industrial applications.