Demand taps for industrial use
Walcro 100D demand pillar tap
The Walcro 100D demand pillar tap is attached to the mains with 15 mm diameter BSP inlet. Made with DZR brass with chrome finish. The tap comes with internal flow control, spout strainer and a no- hold feature with water saving auto shut- off. Cold water or pre- mixed hot water only. SANS 1808- 66
| Minimum pressure | 0.1 Bar |
| Maximum pressure | 6.0 bar |
| Sound insulation | No |
| Runing time | On demand |
| Height | ± 65 mm |
| Reach | 107 mm |
| Order code | W-100D |
Walcro 101D demand bib/wall tap
The Walcro 101D demand bib tap is attached to the mains with 15 mm diameter BSP inlet. Made with DZR brass with chrome finish. The tap comes with internal flow control, spout strainer and a no- hold feature with water saving auto shut- off. Cold water or pre- mixed hot water. SANS 1808- 66
| Minimum pressure | 0.1 Bar |
| Maximum pressure | 6.0 bar |
| Sound insulation | No |
| Runing time | On demand |
| Height | 80 mm |
| Reach | 107 mm |
| Order code | W-101D |
Walcro 111D demand stopcock tap
The Walcro 101D demand stopcock tap is attached to the mains with 15 mm diameter BSP inlet. Made with DZR brass with chrome finish. The tap comes with internal flow control, spout strainer and a no- hold feature with water saving auto shut- off. Cold water or pre- mixed hot water. SANS 1808- 66.
| Minimum pressure | 0.1 Bar |
| Maximum pressure | 6.0 bar |
| Sound insulation | No |
| Runing time | On demand |
| Height | 74 mm |
| Length | 70 mm |
| Order code | W-111D |
